Beginner Quilting - Getting to know your machine (1)

Instructor - Jane Bergquist
Cost $25.00
this is a 3 part series, but you do not need to enroll in all three classes.  They are separate.

In this class you will learn: 

Cutting Basics

• How to use a mat and rotary cutter
• Why you don't use the measurements on the mat
• How to properly hold the rotary cutter.
• Why your cutting may not be straight.

Getting to know your machine: 

• Describe the different parts of the machine and what they do. 
• How to thread the machine and why it's important to do it correctly.
• How to fill a bobbin and load it into your machine.
• What the measurements on the throat plate mean.
• How to lift and lower the feed dogs.  What are feed dogs?  What do they do? 
• Learn about the special feet for your machine. 
• What is a seam and how to determine if you're using a 1/4" seam. 

How to sew a straight line: 

• Learn how to guide a piece of fabric to get a straight line. 
• And...learn how NOT to feed your fabric. 

Please bring basic sewing supplies with you, including: 
Sewing machine in good working order with the manual
Rotary cutter
Cutting mat
Ruler, preferably 6 1/2" x 24"
Fine, sharp pins
Seam Ripper

All supplies, except the machine are available in the shop for sale. 

Please bring drinks and snacks if you wish.  We have a small refrigerator for your use.